DR-70D SPECIFICATIONS
Recording media |
SDHC card(4GB to 32GB), SDXC card(48GB to 128GB) High speed cards required. See the Tested Media List on the DR-70D DOWNLOADS page. |
Recording format | |
WAV | 44.1k / 48k / 96k Hz, 16bit / 24bit |
BWF | 44.1k / 48k / 96k Hz, 16bit / 24bit |
Number of channels | 4-channel (stereo × 2, mono × 4) |
Analog audio input | |
1/L, 2/R, 3/L, 4/R connectors | |
Connector | XLR-3-31 (1:GND, 2:HOT, 3:COLD) / 6.3mm(1/4")TRS standard jack |
Set to "MIC / MIC+PHANTOM" | |
Input impedance | 2k ohms |
Phantom power | 48V +/-4V(10mA/CH), 24V +/-4V(10mA/CH) |
Maximum input level | 0dBu |
Minimum input level | -72dBu |
MIC input gain | TRIM MAX |
LOW | +21dB |
MID | +36dB |
HIGH | +51dB |
HI + PLUS |
+63dB |
Set to "LINE" | |
Input impedance | 10k ohms or more |
Standard input level | +4dBu |
Maximum input level | +20dBu |
1/2 connector | |
Connector | 3.5mm(1/8")stereo mini jack (this connector can be supplied plug-in power) |
Input impedance | 10k ohms |
Maximum input level | +10dBV |
Minimum input level | -50dBV |
MIC input gain | TRIM MAX |
LOW | +3dB |
MID | +11dB |
HIGH | +26dB |
HI + PLUS | +38dB |
CAMERA IN connector | |
Connector | 3.5mm(1/8")stereo mini jack |
Input impedance | 10k ohms |
Standard input level | -10dBV |
Maximum input level | +6dBV |
Analog audio output | |
LINE OUT connector | |
Connector | 3.5mm(1/8")stereo mini jack |
Output impedance | 200 ohms |
Standard output level | -10dBV |
Maximum output level | +6dBV |
CAMERA OUT connector | |
Connector | 3.5mm(1/8")stereo mini jack |
Output impedance | 200 ohms |
Standard output level | -40dBV |
Maximum output level | -24dBV |
PHONES connector | |
Connector | 3.5mm(1/8")stereo mini jack |
Maximum output level | 20mW + 20mW |
USB | |
Connector | Micro-B type |
Format | USB2.0 HIGH SPEED mass storage class |
REMOTE | |
Connector | 2.5mm TRS jack |
Power | 4 AA batteries(Alkaline or NI-MH), USB bus power, Dedicated AC adapter(TASCAM PS-P515U, sold separately), Dedicated external battery pack(TASCAM BP-6AA, sold separately) |
Power consumption | 5.0W |
Continuous operation time | 2ch WAV, 44.1kHz, 16bit rec Phantom power not used |
DR-70D Battery Life (hours:minutes) | |
Alkaline batteries (EVOLTA) | About 6:00 : When XLR/TRS input selecte (Phantom off) About 3:30 : When XLR/TRS input selecte (Phantom on) About 11:00 : When 3/4 MIC (Built-in Mic) selected |
NI-MH batteries (eneloop) | About 6:15 : When XLR/TRS input selecte (Phantom off) About 3:15 : When XLR/TRS input selecte (Phantom on) About 10:30 : When 3/4 MIC (Built-in Mic) selected |
NI-MH batteries (eneloop pro) |
About 7:45 : When XLR/TRS input selecte (Phantom off) About 4:45 : When XLR/TRS input selecte (Phantom on) About 14:15 : When 3/4 MIC (Built-in Mic) selected |
DR-70D + BP-6AA | *BP-6AA is using the alkaline batteries (EVOLTA). |
Alkaline batteries (EVOLTA) | About 13:00 : When XLR/TRS input selecte (Phantom off) About 7:30 : When XLR/TRS input selecte (Phantom on) About 25:30 : When 3/4 MIC (Built-in Mic) selected |
NI-MH batteries (eneloop) | About 12:45 : When XLR/TRS input selecte (Phantom off) About 7:45 : When XLR/TRS input selecte (Phantom on) About 24:45 : When 3/4 MIC (Built-in Mic) selected |
NI-MH batteries (eneloop pro) |
About 14:30 : When XLR/TRS input selecte (Phantom off) About 8:45 : When XLR/TRS input selecte (Phantom on) About 27:00 : When 3/4 MIC (Built-in Mic) selected |
Dimensions | 6.65(W)×2.2(H)×4.2(D)in 169(W)×55.2(H)×106.5(D)mm (with the top adapter attached) |
Weight | 1.37lb ( including batteries) / 1.16lb (without batteries ) 625g ( including batteries) / 530g (without batteries ) |
Operating temperature | 0 to 40˚C |
Standard accessories | USB cable, Camera attachment bracket screw hole covers × 6 Owner's Manual (including warranty) |
Audio performance | |
Frequency response | 20-20kHz +0.5/-2dB(LINE IN or MIC IN to LINE OUT, Fs44.1k/48k Hz, JEITA) 20-40kHz +0.5/-3dB(LINE IN or MIC IN to LINE OUT, Fs96kHz, JEITA) |
Distortion | 0.02% or less(LINE IN or MIC IN to LINE OUT Fs44.1k/48k/96k Hz, JEITA) |
S/N ratio | 92dB or more(LINE IN or MIC IN to LINE OUT Fs44.1k/48k/96k Hz, JEITA) |
Equivalent input noise | -120dBu or less |
Computer compatibility | |
Windows | |
OS | Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1 |
CPU | Pentium 300MHz or more |
RAM | 128MB or more |
USB | recommended: USB2.0 |
Macintosh | |
OS | Mac OS X Jaguar (V10.2), Mac OS X Panther (V10.3), Mac OS X Tiger (V10.4), Mac OS X Leopard (V10.5), Mac OS X Snow Leopard(V10.6.8), OS X Lion(V10.7), OS X Mountain Lion(V10.8), OS X Mavericks(10.9) |
CPU | Power PC, iMac, G3, G4 266MHz or more |
RAM | 64MB or more |
USB | recommended: USB2.0 |
Recording Duration
The table below shows the maximum recording time on SD/SDHC cards of different capacities for different file formats for recording.
File format(recording setting) | SD/SDHC card capacity(hours:mintes) | ||||
1GB | 2GB | 4GB | 8GB | ||
WAV/BWF 16bit(STEREO) | 44.1kHz | 1:41 | 3:22 | 6:44 | 13:28 |
48kHz | 1:33 | 3:06 | 6:12 | 12:24 | |
96kHz | 0:46 | 1:33 | 3:06 | 6:12 | |
WAV/BWF 24bit(STEREO) | 44.1kHz | 1:07 | 2:15 | 4:30 | 9:00 |
48kHz | 1:02 | 2:04 | 4:08 | 8:16 | |
96kHz | 0:31 | 1:02 | 2:04 | 4:08 |
- The recording times shown above are estimates. They might differ depending on the SD/SDHC card in use.
- The recording times shown above are not continuous recording times, but rather they are the total possible recording times for the SD/SDHC card.
- If recorded in mono in WAV files, the maximum recording time will be double the figures above.
- For dual and 4-channel recording in WAV/BWF format, the recording times are about half those shown above.
DR-70D Tested media List
Visit the downloads page for a list of SD card media tested with the DR-70D.