HS-2 CARACTERISTIQUES
General | ||
---|---|---|
Recording media | SD card / SDHC card CompactFlash (CF) card |
|
File system | FAT32 (4 GB or more) FAT16 (2 GB or less) |
|
File format | BWF (Broadcast Wave Format) WAV (Waveform Audio Format) |
|
Number of channels | 2 channels | |
Quantization bit rate | 16-bit, 24-bit | |
Sampling frequency | 44.1/48/88.2/96/176.4/192 kHz | |
Clock reference | INTERNAL, WORD IN, VIDEO IN, DIGITAL IN | |
Time code frame rates | 23.976, 24, 25, 29.97DF, 29.97NDF, 30DF, 30NDF |
Analog audio inputs and outputs | ||
---|---|---|
The error for nominal and maximum levels is ±1 dB for all input and output jacks except the PHONES jack. | ||
ANALOG INPUTS L / R (BALANCED | XLR–3–31 (1: GND, 2: HOT, 3: COLD) | |
Input impedance | 4.3 kOhm | |
Nominal input level | +4 dBu (1.23 Vrms) ±1 dB (+6 dBu when maximum input level is set to +15 dBu an Digital Ref. Level is set to –9 dB) |
|
Maximum input level (selectable) | +15 dBu (4.36 Vrms) +18 dBu (6.16 Vrms) +20 dBu (7.75 Vrms) +22 dBu (9.76 Vrms) +24 dBu (12.3 Vrms) |
|
ANALOG INPUTS L / R (UNBALANCED) | RCA pin jack | |
Input impedance | 3.9 kOhm | |
Nominal input level | –10 dBV (0.316 Vrms) ±1 dB | |
Maximum input level | +6 dBV (2.0 Vrms) ±1 dB | |
ANALOG OUTPUTS L / R (BALANCED) | XLR–3–32 (1: GND, 2: HOT, 3: COLD) | |
Output impedance | 100 Ohm or less | |
Nominal output level | +4 dBu (1.23 Vrms) ±1 dB (+6 dBu when Digital Ref. Level is set to –9 dB) |
|
Maximum output level (selectable) | +15 dBu (4.36 Vrms) +18 dBu (6.16 Vrms) +20 dBu (7.75 Vrms) +22 dBu (9.76 Vrms) +24 dBu (12.3 Vrms) |
|
ANALOG OUTPUTS L / R (UNBALANCED) | RCA pin jack | |
Output impedance | 100 Ohm or less | |
Nominal input level | –10 dBV (0.32 Vrms) ±1dB | |
Maximum input level | +6 dBV (2.0 Vrms) ±1dB | |
PHONES jack | 6.3-mm stereo jack | |
Maximum output power | 45 mW + 45 mW or more (THD+N 0.1% or less, into 32 Ohm) |
Digital audio inputs and outputs | ||
---|---|---|
DIGITAL IN (S/PDIF) | RCA pin jack | |
Input signal voltage amplitude | 200 mVpp to 600 mVpp | |
Input impedance | 75 Ohm | |
Format | AES3-2003 / IEC60958-4 (AES/EBU) IEC60958-3 (SPDIF) |
|
Supported sampling frequencies | 44.1/48/88.2/96/176.4/192 kHz (Single / Double / Quad) When SRC is ON, the receivable range is 32–192 kHz. |
|
DIGITAL IN (AES/EBU) | XLR–3–31 | |
Input signal voltage range | 200 mVpp to 10 Vpp | |
Input impedance | 110 Ohm ±20% | |
Format | AES3-2003/IEC60958-4(AES/EBU) IEC60958-3(SPDIF) |
|
Supported sampling frequencies | 44.1/48/88.2/96/176.4/192 kHz (Single/ Double/ Quad) When SRC is ON, the receivable range is 32–192 kHz. |
|
DIGITAL OUT (S/PDIF) | RCA pin jack | |
Output voltage | 0.5 Vpp ±20% | |
Input impedance | 75 Ohm | |
Format | IEC60958-3 (SPDIF) | |
Supported sampling frequencies | 44.1/48/88.2/96/176.4/192 kHz (Single/ Double/ Quad) | |
DIGITAL OUT (AES/EBU) | XLR–3–32 | |
Output voltage | 2–5 Vp–p/110 Ohm | |
Output impedance | 110 Ohm ±20% | |
Format | IEC60958–4 (AES3–2003, AES/EBU) | |
Supported sampling frequencies | 44.1/48/88.2/96/176.4/192 kHz (Single/ Double/ Quad) |
Control inputs and outputs | ||
---|---|---|
RS–422 (attached with Option SY-2 board) | D–sub 9-pin | |
RS–232C | D–sub 9-pin | |
PARALLEL | D–sub 25-pin | |
TIME CODE IN (attached with Option SY-2 board) | BNC connector | |
Signal voltage amplitude | 0.5–5 Vpp | |
Input impedance | 10 kOhm | |
Format | SMPTE 12M–1999 compliant | |
TIME CODE OUT (attached with Option SY-2 board) | BNC connector | |
Signal voltage amplitude | 2 Vpp | |
Output impedance | 600 Ohm | |
Format | SMPTE 12M–1999 compliant | |
WORD/VIDEO IN | BNC | |
Input voltage | 5 V TTL equivalent (WORD IN) | |
Signal voltage amplitude | 1 Vpp (VIDEO IN) | |
Input impedance | 75 Ohm ±10% | |
Allowable frequency deviation of external synchronization | ±100 ppm | |
Input frequencies (WORD) | 44.1/48/88.2/96/176.4/192 kHz | |
Input signal (VIDEO) | 24/25/29.97/30 Frame (NTSC/PAL Black burst, HDTV Tri–Level) | |
WORD/VIDEO THRU/OUT | BNC (OUT/THRU switch included (OUT is only for WORD OUT) | |
Signal voltage amplitude | 5 V TTL equivalent | |
Output impedance | 75 Ohm ±10% | |
Output frequency (WORD) | 44.1/48/88.2/96/176.4/192 kHz | |
Frequency stability | ±10 ppm or less (Ta = 20º C) | |
ETHERNET | RJ45 | |
Compatibility | 100BASE-TX, 1000BASE-T | |
KEYBOARD | Mini-DIN (PS/2) | |
USB | USB A-type 4-pin | |
Protocol | USB2.0 HIGH SPEED (480 Mbps) compliant | |
REMOTE | RJ45 | |
Supply voltage | 13 V | |
Signal | LVDS serial | |
Transmission contents | LCD display DATA, asynchronous serial transmission control signals, port control signals |
Audio performance | ||
---|---|---|
Frequency response, ANALOG IN to ANALOG OUT | 20 Hz – 20 kHz ±0.5 dB (Fs = 44.1/48 kHz, JEITA, recording and playback) 20 Hz – 40 kHz +0.5 dB/−2 dB (Fs = 88.2/96 kHz, JEITA, recording and playback) 20 Hz – 80 kHz +0.5 dB/−5 dB (Fs = 176.4/192 kHz, JEITA, recording and playback) |
|
Distortion, ANALOG IN to ANALOG OUT | 0.005% or less (JEITA, recording and playback) | |
S/N ratio, ANALOG IN to ANALOG OUT | 100 dB or more (JEITA, recording and playback) |
Power supply and other specifications | ||
---|---|---|
Power | AC 100-240 V, 50–60 Hz | |
Power consumption | 22 W | |
External dimensions (W x H x D) | 483 mm x 94 mm x 317 mm | |
Weight | 4.9 kg | |
Operating temperature range | 5–35 °C |
Conception et caractéristiques sujettes à modification sans avis préalable.