tascam.comtascam.jptascam-ca.comfr.tascam-ca.comtascam.cn


Produits :: Enregistreurs/Lecteurs :: HS serie :: HS-4000

HS-4000 - Enregistreur 4 pistes

HS-4000 CARACTERISTIQUES


General
Recording media   CompactFlash (CF) card
File system   FAT32 (4 GB or more)
FAT16 (2 GB or less)
File format   BWF (monophonic, polyphonic)
Number of channels   4 channels (excluding playlist dual mode)
2 stereo mix channels × 2 (dual playlist mode)
Quantization bit rate   16-bit, 24-bit
Sampling frequency   44.1/47.952/48/48.048/88.2/96 kHz (47.952/48.048 kHz: 48k±0.1% pull-down/pull-up)
Clock reference   INTERNAL, WORD IN, VIDEO IN, DIGITAL IN (1–2)
Time code frame rate   23.976, 24, 25, 29.97DF, 29.97NDF, 30DF, 30NDF

 

Analogue audio inputs and outputs
The error for nominal and maximum levels is ±1 dB for all input and output jacks except the PHONES jack.
ANALOG IN (LINE) jacks (1–4)   XLR–3–31 (1: GND, 2: HOT, 3: COLD)
  Input impedance   4.3 kOhm
  Nominal input level   +4 dBu (1.23 Vrms) ±1 dB
–20 dBu (0.0775 Vrms) ±1 dB (selectable)
(+6 dBu when Digital Ref. Level is set to –9 dB)
  Maximum input level (selectable)   +15dBu (4.36Vrms)
+18dBu (6.16Vrms)
+20dBu (7.75Vrms)
+22dBu (9.76Vrms)
+24dBu (12.3Vrms)
–6dBu (0.388Vrms)
–4dBu (0.489Vrms)
–2dBu (0.616Vrms)
0dBu (0.775Vrms)
ANALOG OUT (LINE) connectors (1–4)   XLR–3–32 (1: GND, 2: HOT, 3: COLD)
  Output impedance   100 Ohm or less
  Nominal output level   +4 dBu (1.23 Vrms) ±1 dB
–20 dBu (0.0775 Vrms) ±dB (selectable)
(+6 dBu when Digital Ref. Level is set to –9 dB)
  Maximum output level (selectable)   +15dBu (4.36Vrms)
+18dBu (6.16Vrms)
+20dBu (7.75Vrms)
+22dBu (9.76Vrms)
+24dBu (12.3Vrms
–6dBu (0.388Vrms
–4dBu (0.489Vrms
–2dBu (0.616Vrms
0dBu (0.775Vrms
ANALOG OUT (MONITOR) jacks (L/R)   XLR–3–32(1: GND, 2: HOT, 3: COLD)
  Output impedance   100 Ohm
  Nominal output level   +6 dBu (1.55 Vrms)
(Digital Ref. Level= when set to –9 dB)
+4 dBu (1.23 Vrms)
(Digital Ref. Level= when not set to –9 dB)
  Maximum output level (selectable)   +15dBu (4.36Vrms)
+18dBu (6.16Vrms)
+20dBu (7.75Vrms)
+22dBu (9.76Vrms)
+24dBu (12.3Vrms
PHONES jack   standard 6.3-mm (1/4”) stereo jack
  Maximum output power   45 mW + 45 mW or more (THD+N 0.1% or less, into 32 Ohm)

 

Digital audio inputs and outputs
DIGITAL INPUT connector (1/2)   XLR–3–31
  Minimum/maximum input signal voltage range   200 mVpp to 10 Vpp
  Input impedance   110 Ohm ±20%
  Format   AES3-2003/IEC60958-4(AES/EBU)
IEC60958-3(S/PDIF)
  Supported sampling frequencies   44.1/47.952/48/48.048/88.2/96 kHz(single/double)
Note: When SRC is ON, the receivable range is 32–192 kHz.
DIGITAL OUTPUT connector (1/2)   XLR–3–32
  Output voltage   2–5 Vpp
  Output impedance   110 Ohm ±20%
  Format   IEC60958–4 (AES3–2003, AES/EBU)
  Supported sampling frequencies   44.1/47.952/48/48.048/88.2/96 kHz (single/double)

 

Control inputs and outputs
RS–422   D–sub 9-pin
RS–232C   D–sub 9-pin
PARALLEL   D–sub 25-pin
TIME CODE IN   XLR–3–31
  Signal voltage amplitude   0.5–10 Vpp
  Input impedance   10 kOhm
  Format   SMPTE 12M–1999 compliant
TIME CODE OUT   XLR–3–32
  Signal voltage amplitude   2 Vpp
  Output impedance   100 Ohm
  Format   SMPTE 12M–1999 compliant
WORD/VIDEO IN   BNC, Includes switch for enabling termination
  Input voltage   5V TTL equivalent (WORD IN)
  Signal voltage amplitude   1 Vpp (VIDEO IN)
  Input impedance   75 Ohm ±10%
  Allowable frequency deviation of external synchronization   ±100 ppm
  Input frequency (WORD)   44.1/47.952/48/48.048/88.2/96 kHz
  Input signal (VIDEO)   24/25/29.97/30 Frame (NTSC/PAL Black burst, HDTV Tri–Level)
WORD/VIDEO THRU/OUT   BNC, OUT/THRU switch included (OUT is only for WORD OUT)
  Signal voltage amplitude   5V TTL equivalent
  Output impedance   75 Ohm or less
  Output frequency (WORD)   44.1/47.952/48/48.048/88.2/96 kHz (47.952/48.048 kHz: 48k±0.1% pull-down/pull-up)
  Frequency stability   ±10 ppm or less (Ta = 20º C)
ETHERNET   RJ45
KEYBOARD   Mini-DIN (PS/2)
USB   USB A-type 4-pin
  Protocol   USB2.0 HIGH SPEED (480 Mbps) compliant
REMOTE   ETHERCON (CAT6 compatible)
  Power supply voltage   13 V/41 V
  Signal   LVDS serial
  Transmission contents   LCD display data, asynchronous serial transmission control signals, port control signals

 

Audio performance
Frequency response, ANALOG IN to ANALOG OUT   20 Hz – 20 kHz: ±0.5 dB (Fs = 44.1/48 kHz, JEITA, recording and playback)
20 Hz – 40 kHz: +0.5 dB/−2 dB (Fs = 88.2/96 kHz, JEITA, recording and playback)
Distortion, ANALOG IN to ANALOG OUT   0.005% or less (JEITA, recording and playback)
S/N ratio, ANALOG IN to ANALOG OUT   100 dB or less (JEITA, recording and playback)

 

Power supply and other specifications
Power   AC 100-240 V, 50–60 Hz
Power consumption   25 W
External dimensions (W x H x D)   483 mm x 94 mm x 317 mm
Weight   5.1 kg
Operating temperature range   5–35 ºC

Conception et caractéristiques sujettes à modification sans avis préalable.