CD-VT2 SPECIFICATIONS
- Portable CD Music/Vocal trainer (More compact than previous CD-VT1MKII)
- CD-DA/CD-R/CD-RW disc playback
- 10 second anti-shock memory
- Comprehensive 128 x 64 dot matrix LCD display with graphical user interface
- Album title/Track title indication by CD-Text
- Elapsed Time/Remain Time display with bar meter
- +16 to -50% pitch control in 1% steps
- VSA (Variable Speed Audition, pitch control without affecting key)
- Key control: +/-6 semi-tone, in semi-tone steps with +/-50 cents fine tune
- Single play and continuous play
- Single Loop, All Loop, and Seamless IN-OUT Loop
- Flash Back function (Instant review up to 5 seconds prior playback)
- Vocal/Instrument Canceller with selectable canceling pan point and selectable frequency range
- 10 effect banks for user preset
- Chromatic tuner with calibration (435 to 445Hz)
- 3 octaves tone oscillator
- Metronome (BPM: 40 to 220, Beat: 2 to 6)
- (2x) 1/4" Mic inpu
- Mic input volume
- Mic input level meter indicator on LCD display
- CD level meter indicator
- 5 selectable functions by foot switch (Flash Back, Rewind, FF, Bank, Effect on/off)
- 1/8" stereo line output
- 1/8" stereo headphone output
- Headphone volume
- MONO monitor for CD (L+R, L, R)
- Split monitor (Left ch: CD, Right ch: Input or vice versa)
- Battery operation
- Optional power supply PS-P520
| Disc Type: | 8cm and 12cm CD |
| Line Output Connector: | 1/8" Stereo mini connector |
| Nominal Stereo Output Level: | -10dBV |
| Output Impedance: | 600ohm (2V RMS) |
| Maximum Output Level (LINE OUT): | +6dBV |
| Headphone Output Connector: | 1/8" Stereo mini connector |
| Maximum Output Level (PHONES): | 15mW (at 32ohm loaded) |
| Mic Input Connectors: | 1/4" Phone Connector |
| Nominal Input Level | |
| Mic Input: | -40dBV |
| Maximum Input Level | |
| Mic Input: | -19dBV |
| Frequency Response: | 20 Hz to 20 kHz (-3/+1dB) (A weight filter + 20KHz LPF) |
| Signal to Noise Ratio: | Better than 85 dB |
| Total Harmonic Distortion: | < 0.03% (200Hz HPF + 20KHzLPF) |
| Channel Separation: | Better than 80dB (A weight filter + 20KHz LPF) |
| Power Requirements: | DC 5V (Optional AC adapter PS-P520) AA batteries x 4 |
| Power Consumption: | 4W (with PS-P520) |
| Dimensions (W x H x D): | 194 x 38.7 x 138(mm) |
| Weight (excluding batteries): | 550g |
on Facebook
on Twitter
on YouTube
Join Email List