CG-2000 SPECIFICATIONS
| CG-2000 | CG-1800 | CG-1000 | |
| Inputs | |||
| VIDEO INPUTS | |||
| Connector | BNC×2(A/B) | BNC | - |
| Input level | 0.5Vp-p to 2.0Vp-p | - | |
| Input impedance | 75ohm (ON/OFF selectable by menu) | - | |
| Input signal | |||
| SD video black burst | NTSC(29.97), NTSC B/W(30), PAL(25) | - | |
| HD video tri-level | |||
| 720p | 50, 59.97, 60 | - | |
| 1080p | 23.976, 24, 25, 29.97, 30, 59.94, 60 | - | |
| 1080i/psf | 23.976, 24, 25, 29.97, 30 | - | |
| Allowable frequency deviation | +/-10ppm | - | |
| WORD/EXT INPUTS | |||
| Connector | BNC×2(A/B) | BNC | |
| Input level | 0.5Vp-p to 5.0Vp-p | ||
| Input impedance | 75ohm/50ohm(75/50/OFF selectable by menu) | ||
| Supported frequencies | |||
| WORD CLOCK | 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz | ||
| ATOM | 10.0 MHz | ||
| GPS | 10.0MHz | ||
| Allowable frequency deviation | +/-50ppm | ||
| AES3/11 INPUT | |||
| Connector | XLR-3-31(1:GND, 2:HOT, 3:COLD) | ||
| Input level | 0.2Vp-p to 10Vp-p | ||
| Input impedance | 110ohm | ||
| Format | AES11-2003, AES3-2003, IEC60958-4 | ||
| Supported frequencies | 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz | ||
| Allowable frequency deviation | +/-50ppm | ||
| CALIBLATION INPUT | |||
| Connector | BNC | ||
| Input level | 0.5 to 5.0 Vp-p | ||
| Input impedance | 50ohm(ON/OFF selectable by menu) | ||
| Supported frequencies | |||
| ATOM | 10.0 MHz | ||
| GPS | 10.0MHz, PPS | ||
| Outputs | |||
| VIDEO OUTPUTS | |||
| Connector | BNC×4(1-4) | - | |
| Output level | 1.3Vp-p | - | |
| Output impedance | 75ohm | - | |
| Output signal | |||
| SD video black burst | NTSC(29.97), NTSC B/W(30), PAL(25) | - | |
| HD video tri-level | |||
| 720p | 50, 59.97, 60 | - | |
| 1080p | 23.976, 24, 25, 29.97, 30, 50, 59.94, 60 | - | |
| 1080i/psf | 23.976, 24, 25, 29.97, 30 | - | |
| WORD OUTPUTS | |||
| Connector | BNC×12(1-12) | ||
| Output level | 1.0Vp-p to 3.5Vp-p (adjustable in 0.5V steps by menu) | ||
| Output impedance | 75ohm | ||
| Supported frequencies | 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz 1/4xFs, 1/2xFs, 1xFs, 2xFs, 4xFs, 256xFs (Only OUTPUTS 11-12) |
||
| AES3/11 OUTPUTS | |||
| Connector | XLR-3-31(1:GND, 2:HOT, 3:COLD)×2(1-2) | ||
| Output level | 2.5Vp-p | ||
| Output impedance | 110ohm | ||
| Format | AES11-2003, AES3-2003, IEC60958-4 | ||
| Supported frequencies | 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz | ||
| S/PDIF OUTPUTS | |||
| Connector | RCA pin jacks ×2(1-2) | ||
| Output level | 0.5Vp-p | ||
| Output impedance | 75ohm | ||
| Format | IEC60958-3 | ||
| ALARM OUTPUT | |||
| Connector | 6-pin Euroblock connector | - | |
| Output level | Open collector | - | |
| Transmission method | Parallel | - | |
| Output impedance | 10ohm | - | |
| Withstand voltage | 20V | - | |
| Maximum current | 35mA | - | |
| USB | A data transfer use by a USB flash drive | ||
| Connector | 4-pin type B | ||
| Protocol | USB2.0 High Speed (480Mbps) | ||
| Power supply rating | DC5.0V, 0.2A | ||
| Internal oscillator performance | |||
| TYPE | OCXO | ||
| frequency accuracy | +/-0.01ppm(factory default value) | ||
| frequency stability | +/-0.005ppm / day | ||
| Power | AC100V to 240V, 50/60Hz | ||
| Power consumption | 14W | 11.5W | 10W |
| Dimensions | 483(W)×45(H)×310(D)mm | ||
| Weight | 3.3kg | 3.2kg | 3.1kg |
| Operating temperature range | 0˚C to 40˚C | ||
| Included accessories | Power cords×2, rackmounting screw kit, operation manual (with warranty) | Power cords, rackmounting screw kit, operation manual (with warranty) | |
on Facebook
on Twitter
on YouTube
Join Email List